To clean a rendered wall, identify the render first, then apply a masonry-safe algae and mould treatment at low pressure, leave it to work and rinse gently. Avoid high pressure, wire brushes and neat bleach, which can mark or damage the finish. Most render, from painted sand and cement to silicone and monocouche, responds to this treat-and-rinse approach, but each type has its own precautions.
This is the practical, step-by-step version for homeowners: how to tell what your wall is made of, what to use, how to do a small area yourself and where DIY stops being sensible. For why render discolours in the first place, see why render goes green, and for an overview of professional methods, render cleaning: the complete guide.
Know which render you have
Painted sand and cement render is the traditional finish: smooth or lightly textured, with masonry paint on top. Its weak point is the paint, which can flake if it is old or was put on over a dirty wall, so anything that strips paint has to be kept well away.
Through-coloured renders such as monocouche, and many silicone or polymer systems including K-Rend, carry their colour through the material and are not painted. Silicone finishes are designed to shed water, which helps, but their surface can still be marked by aggressive scrubbing. Our guide comparing K-Rend and monocouche cleaning explains how to tell them apart.
Textured finishes such as pebble dash, spar dash and roughcast hold dirt in their texture and can lose stones if blasted. If you are unsure what you have, check any paperwork from when the house was rendered, or send us a photo and we will tell you what we think it is.
What you need
A garden pump sprayer, a masonry-safe algae and mould remover made for exterior walls, a soft brush on an extending pole, a hose and something to cover delicate plants. A pressure washer is optional and only useful if it turns right down; some render systems come with care guidance that rules it out, so check before using one.
Choose a dry, still, overcast day. Rain washes the treatment off before it has worked, wind carries spray onto plants and glass, and strong sun dries it out too quickly.
Step by step: cleaning a rendered wall
Prepare the area
Close the windows, wet down the borders below the wall so they absorb less runoff, and move pots, cushions and cars out of the way. Cover air bricks or vents if the product label recommends it.
Test a small patch
Apply the product to an out-of-sight area, follow the label, rinse and let it dry. Check the colour and texture look unchanged before going further, particularly on coloured or painted render.
Treat the wall
Spray the treatment evenly, working from the bottom upwards so it does not run in streaks over dry render, and leave it for the dwell time on the label. Do not let it bake dry in hot sun.
Rinse gently
Rinse from the top down with a hose, or with a pressure washer on its lowest setting held well away from the wall. Use the soft brush only where dirt clings, with light strokes.
Check once it dries
Many treatments carry on working after the rinse, so faint green and grey can fade over the next few weeks of rain. Stubborn black spots, or orange and red patches, may need a second treatment; see red algae on render.
Mistakes that damage render
High pressure is the big one. It can etch the face of the render, strip paint, force water into hairline cracks and, on textured finishes, chip out stones. Wire brushes and scouring pads leave scratches that hold dirt and show as lighter patches. Neat bleach gives a quick result that fades, can mark coloured finishes and harms the plants below.
Cleaning a cracked or blown wall is another trap. Water from the wash can get behind the render through an open crack, so have damaged areas looked at by a renderer first. Cleaning is about the surface; it will not fix a wall that needs repair.
When to call a professional
DIY is sensible for a ground-floor wall you can reach from the ground. Upper floors, gable ends, walls above a conservatory and large areas are a different job, both for safety and for an even result across the whole elevation. Our render cleaning service uses soft washing and steam, applying a dilute solution at low pressure so it works on the growth, with steam where heat helps lift stubborn deposits. We are trained in biocide use and fully insured, and planting, paths and drains are considered before anything goes on the wall.
We do not publish a price list. Tell us the type of render and roughly how much wall is involved, send a photo if you can, and we will quote: request a quote or call 07501060609. Our render cleaning cost guide explains what affects the price.
Want a professional to handle it?
Need a hand with your property?
Quotes across the North East. Call us or request a quote.
Call 07501060609We cover the North East only – up to 45 miles from Washington (NE37): Newcastle, Sunderland, Durham, Gateshead, South Shields, Middlesbrough and surrounding areas.
Get Your Quote!
Enter your details below and one of our experts will be in touch to discuss the work needed and give you your quote.
We cover the North East only – up to 45 miles from Washington (NE37): Newcastle, Sunderland, Durham, Gateshead, South Shields, Middlesbrough and surrounding areas.
Frequently asked questions
Related guides
More on this topic: render, brick and walls guides and service
